Home / Parameters / 30000W (150u)

30000W (150u) laser cutting parameters

30000W (150u) laser cutting parameters RFL-30000(150u)

Source modelRFL-30000(150u)

OpticsCollimator 100 / Focus 200

Rows116

Materials5

Parameter table

Switch material to see every thickness row for this configuration.

Trial-shot parameter — small batch onlyRecommended for production

Note: parameters marked in red are trial-shot values. Actual results vary significantly with material, gas and machine condition — they suit small-batch production only and are not recommended for high-volume runs. A higher-power laser is advised for series production.

Carbon steel

5 – 80 mm

Thickness (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzle (mm)	Focus position (mm)	Stand-off (mm)
5	22-30	30000	N₂/Air	8	3.0S	0	0.5
6	18-22	30000	N₂/Air	8	3.0S	-0.5	0.5
8	14-16	30000	N₂/Air	8	3.0S	-1	0.5
10	12-15	30000	N₂/Air	8	3.5S	-1.5	0.5
12	10-12	30000	N₂/Air	8	3.5S	-2	0.5
14	8-10	30000	N₂/Air	8	4.0S	-3	0.5
16	7-8	30000	N₂/Air	8	5.0S	-4	0.5
18	5.5-6	30000	N₂/Air	10	6.0S	-6	0.5
20	4.5-5.5	30000	N₂/Air	10	6.0S	-8	0.5
25	2.8-3.2	30000	N₂/Air	10	6.0S	-12	0.5
10	2-2.3	6000	O₂ positive focus	0.6	1.2E	+8	0.8
12	1.8-2	7500	O₂ positive focus	0.6	1.2E	+9	0.8
14	1.6-1.8	8500	O₂ positive focus	0.6	1.4E	+10	0.8
16	1.6-1.8	9500	O₂ positive focus	0.6	1.4E	+11	0.8
20	1.5-1.6	12000	O₂ positive focus	0.6	1.6E	+12	0.8
22	1.4-1.5	20000	O₂ positive focus	0.7	1.4SP	+13	0.5
25	1.2-1.4	20000	O₂ positive focus	1.0	1.5SP	+13	0.4
30	1.2-1.3	20000	O₂ positive focus	1.2	1.5SP	+13.5	0.4
40	0.6-0.9	20000	O₂ positive focus	1.4	1.6SP	+14	0.4
40 (non-Q235)	0.3-0.6	20000	O₂ positive focus	1.6	1.8E	+13	2
50 (non-Q235)	0.3-0.5	20000	O₂ positive focus	1.6	1.8E	+13	2
50	0.6-0.8	30000	O₂ positive focus	1.6	1.8SP	+14	0.4
60	0.2-0.25	30000	O₂ positive focus	1.6	1.8E	+13.5	2
70	0.18-0.2	30000	O₂ positive focus	1.7	1.8E	+13.5	2
80	0.12-0.15	30000	O₂ positive focus	1.8	1.8E	+14	2
12	3.2-3.5	30000	O₂ negative focus	1	1.6SP	-10	1.5
14	3-3.2	30000	O₂ negative focus	1	1.6SP	-10	1.5
16	3-3.1	30000	O₂ negative focus	1	1.6SP	-12	1.5
20	2.8-3	30000	O₂ negative focus	1.2	1.6SP	-12	1.5
25	2.6-2.8	30000	O₂ negative focus	1.3	1.8SP	-14	1.5
30	2.2-2.6	30000	O₂ negative focus	1.4	1.8SP	-14	1.5
35	1.4-1.6	30000	O₂ negative focus	1.4	2.0SP	-15	1.5
40	1-1.4	30000	O₂ negative focus	1.5	2.5S	-15	1.5
45	0.8-0.9	30000	O₂ negative focus	1.6	2.5S	-17	1.5

Stainless steel

1 – 100 mm

Thickness (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzle (mm)	Focus position (mm)	Stand-off (mm)	Frequency (Hz)	Duty cycle (%)
1	50-60	12000	N₂	8	2.0S	0	1
2	50-60	12000	N₂	8	2.0S	0	0.5
3	40-50	30000	N₂	8	2.5S	0	0.5
4	35-40	30000	N₂	8	2.5S	0	0.5
5	25-30	30000	N₂	8	3.0S	0	0.5
6	22-25	30000	N₂	8	3.5B	0	0.5
8	18-22	30000	N₂	8	5.0B	-1	0.5
10	13-16	30000	N₂	8	5.0B	-1.5	0.3
12	10-12	30000	N₂	8	6.0B	-2	0.5
14	8-10	30000	N₂	8	6.0B	-4	0.3
16	7-8	30000	N₂	8	6.0B	-5	0.3
18	6-7	30000	N₂	8	6.0B	-6	0.3
20	4-5	30000	N₂	12	6.0B	-7.5	0.3
25	2-2.5	30000	N₂	12	7.0B	-12	0.3
30	1.2-2	30000	N₂	12	7.0B	-16	0.3
40	0.6-0.8	30000	N₂	16	7.0B	-16	0.3
50	0.2-0.3	30000	N₂	16	8.0B	+11	0.3	200~800	60~75
60	0.15-0.2	30000	N₂	20	8.0B	+11	0.3	200~800	60~75
70	0.1-0.13	30000	N₂	20	8.0B	+11	0.3	100~200	60~75
80	0.08-0.1	30000	N₂	20	8.0B	+11	0.3	100~200	60~75
90	0.05-0.06	30000	N₂	20	8.0B	+11	0.3	50~100	60~75
100	0.04-0.05	30000	N₂	20	8.0B	+11	0.3	50~100	60~75
1	50-60	12000	Air	8	2.0S	0	1
2	50-60	12000	Air	8	2.5S	0	0.5
3	40-50	30000	Air	8	2.5S	0	0.5
4	35-40	30000	Air	8	3.5B	0	0.5
5	25-30	30000	Air	8	3.5B	0	0.5
6	22-25	30000	Air	8	3.5B	0	0.5
8	18-22	30000	Air	10	3.5B	0	0.5
10	14-18	30000	Air	10	3.5B	-1.5	0.3
12	12-14	30000	Air	10	5.0B	-4	0.3
14	10-12	30000	Air	10	5.0B	-6	0.3
16	8-9	30000	Air	10	5.0B	-7	0.3
18	6-7	30000	Air	10	5.0B	-8	0.3
20	5-6	30000	Air	10	5.0B	-9	0.3
25	2.5-3	30000	Air	10	5.0B	-13	0.3
30	1.5-2	30000	Air	10	5.0B	-17	0.3
40	0.8-1	30000	Air	16	7.0B	-16	0.3
50	0.4-0.65	30000	Air	16	8.0B	-18	0.3
60	0.15-0.2	30000	Air	20	8.0B	-20	0.3
70	0.1-0.13	30000	Air	20	8.0B	-25	0.3

Aluminum alloy

1 – 60 mm

Thickness (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzle (mm)	Focus position (mm)	Stand-off (mm)	Frequency (Hz)	Duty cycle (%)
1	55-60	12000	N₂	8	2.0S	0	0.8
2	40-45	12000	N₂	8	2.0S	-1	0.5
3	30-35	30000	N₂	10	2.5S	-1	0.5
4	25-30	30000	N₂	12	2.5S	-2	0.5
5	18-25	30000	N₂	14	3.0S	-3	0.5
6	18-20	30000	N₂	14	3.0S	-3	0.5
8	15-18	30000	N₂	14	3.5S	-4	0.5
10	12-15	30000	N₂	14	3.5S	-5	0.5
12	10-12	30000	N₂	16	5.0B	-6	0.3
14	8-10	30000	N₂	16	5.0B	-7	0.3
16	6-8	30000	N₂	16	5.0B	-7	0.3
18	3-4	30000	N₂	16	5.0B	-7	0.3
20	2-3	30000	N₂	18	6.0B	-7	0.3
25	1.5-2	30000	N₂	18	6.0B	-7.5	0.3
30	0.8-1	30000	N₂	20	7.0B	-7.5	0.3	300~1000	60~80
40	0.5-0.8	30000	N₂	20	7.0B	-9	0.3	300~1000	60~80
50	0.4-0.6	30000	N₂	20	8.0B	-9	0.3	300~1000	60~80
60	0.2-0.3	30000	N₂	20	8.0B	-9	0.3	300~1000	60~80

Brass

1 – 20 mm

Thickness (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzle (mm)	Focus position (mm)	Stand-off (mm)
1	40-45	12000	N₂	12	2.0S	0	1
2	35-40	30000	N₂	12	2.0S	0	0.5
3	28-30	30000	N₂	12	2.0S	0	0.5
4	20-25	30000	N₂	12	2.5S	0	0.5
5	18-20	30000	N₂	14	2.5S	0	0.5
6	15-18	30000	N₂	14	3.0S	0	0.5
8	10-15	30000	N₂	14	3.0S	0	0.5
10	8-10	30000	N₂	14	5.0B	-1	0.3
12	5-8	30000	N₂	14	5.0B	-2	0.3
14	3-5	30000	N₂	16	5.0B	-3	0.3
16	1.5-2	30000	N₂	18	5.0B	-3	0.3
18	1.2-1.5	30000	N₂	18	5.0B	-4	0.3
20	0.8-1	30000	N₂	18	6.0B	-5	0.3

Copper

1 – 14 mm

Thickness (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzle (mm)	Focus position (mm)	Stand-off (mm)
1	25-30	30000	O₂	5	2.0S	0	1
2	25-30	30000	O₂	5	2.0S	0	0.5
3	20-25	30000	O₂	6	2.0S	0	0.5
4	18-20	30000	O₂	8	2.5S	-1	0.5
5	15-18	30000	O₂	8	2.5S	-1	0.5
6	10-15	30000	O₂	8	3.0S	-2	0.5
8	6-10	30000	O₂	10	3.0S	-3	0.5
10	2-3.5	30000	O₂	12	3.5S	-4	0.5
12	2-2.5	30000	O₂	12	3.5S	-5	0.5
14	1.5-2	30000	O₂	12	3.5S	-6	0.5

Frequently asked questions

Are the laser cutting parameters free to view?

Yes. Every parameter table can be read without an account and without payment — all of it, no tiers. What is paid is not content: it is me looking at your specific machine.

Which laser cutting machines are covered?

The library holds 21 machine configurations and 1,668 parameter rows, covering carbon steel, stainless steel, aluminum, brass and copper. Each configuration page states its optics setup.

Optics: 30000W (150u)

Collimator 100 / Focus 200

Keep exploring

All machine configurations Export and offline access