LaserParams3000S 激光切割参数
3000S 激光切割参数 RFL-3000(50u)
源机型RFL-3000(50u)
光学配置准直100/聚焦150
参数行36
材料种类4
参数表
切换材料查看该配置的全部厚度参数行。
打样参数 — 仅适合小批量推荐生产参数
备注：表中红标参数为打样参数，在实际加工中受各类因素影响较大，仅适合小批量生产，不推荐大批量生产加工，建议使用更高功率激光器。
碳钢
1 – 22 mm
| 厚度 (mm) | 速度 (m/min) | 功率 (W) | 气体 | 气压 (bar) | 喷嘴 (mm) | 焦点位置 (mm) | 切割高度 (mm) |
|---|---|---|---|---|---|---|---|
| 1 | 28-35 | 3000 | N₂/Air | 10 | 1.5S | 0 | 1 |
| 2 | 16-20 | 3000 | N₂/Air | 10 | 2.0S | 0 | 0.5 |
| 2 | 3.8-4.2 | 2100 | O₂ | 1.6 | 1.0D | +3 | 0.8 |
| 3 | 3.2-3.6 | 2100 | O₂ | 0.6 | 1.0D | +4 | 0.8 |
| 4 | 3-3.2 | 2400 | O₂ | 0.6 | 1.0D | +4 | 0.8 |
| 5 | 2.7-3 | 3000 | O₂ | 0.6 | 1.2D | +4 | 0.8 |
| 6 | 2.2-2.5 | 3000 | O₂ | 0.6 | 1.2D | +4 | 0.8 |
| 8 | 1.8-2.2 | 3000 | O₂ | 0.6 | 1.2D | +4 | 0.8 |
| 10 | 1-1.3 | 3000 | O₂ | 0.6 | 1.2D | +4 | 0.8 |
| 12 | 0.9-1 | 2400 | O₂ | 0.6 | 3.0D | +4 | 0.8 |
| 14 | 0.8-0.9 | 2400 | O₂ | 0.6 | 3.0D | +4 | 0.8 |
| 16 | 0.6-0.7 | 2400 | O₂ | 0.6 | 3.5D | +4 | 0.8 |
| 18 | 0.5-0.6 | 2400 | O₂ | 0.6 | 4.0D | +4 | 0.8 |
| 20 | 0.4-0.55 | 2400 | O₂ | 0.6 | 4.0D | +4 | 0.8 |
| 22 | 0.45-0.5 | 2400 | O₂ | 0.6 | 4.0D | +4 | 0.8 |
不锈钢
1 – 10 mm
| 厚度 (mm) | 速度 (m/min) | 功率 (W) | 气体 | 气压 (bar) | 喷嘴 (mm) | 焦点位置 (mm) | 切割高度 (mm) |
|---|---|---|---|---|---|---|---|
| 1 | 28-35 | 3000 | N₂ | 10 | 1.5S | 0 | 0.8 |
| 2 | 18-24 | 3000 | N₂ | 12 | 2.0S | 0 | 0.5 |
| 3 | 7-10 | 3000 | N₂ | 12 | 2.5S | -0.5 | 0.5 |
| 4 | 5-6.5 | 3000 | N₂ | 14 | 2.5S | -1.5 | 0.5 |
| 5 | 3-3.6 | 3000 | N₂ | 14 | 3.0S | -2.5 | 0.5 |
| 6 | 2-2.7 | 3000 | N₂ | 14 | 3.0S | -3 | 0.5 |
| 8 | 1-1.2 | 3000 | N₂ | 16 | 3.5S | -4.5 | 0.5 |
| 10 | 0.5-0.6 | 3000 | N₂ | 16 | 4.0S | -6 | 0.5 |
铝
1 – 8 mm
| 厚度 (mm) | 速度 (m/min) | 功率 (W) | 气体 | 气压 (bar) | 喷嘴 (mm) | 焦点位置 (mm) | 切割高度 (mm) |
|---|---|---|---|---|---|---|---|
| 1 | 25-30 | 3000 | N₂ | 12 | 1.5S | 0 | 0.8 |
| 2 | 15-18 | 3000 | N₂ | 12 | 2.0S | 0 | 0.5 |
| 3 | 7-8 | 3000 | N₂ | 14 | 2.0S | -1 | 0.5 |
| 4 | 5-6 | 3000 | N₂ | 14 | 2.5S | -2 | 0.5 |
| 5 | 2.5-3 | 3000 | N₂ | 16 | 3.0S | -3 | 0.5 |
| 6 | 1.5-2 | 3000 | N₂ | 16 | 3.0S | -3.5 | 0.5 |
| 8 | 0.6-0.7 | 3000 | N₂ | 16 | 3.5S | -4 | 0.5 |
黄铜
1 – 6 mm
| 厚度 (mm) | 速度 (m/min) | 功率 (W) | 气体 | 气压 (bar) | 喷嘴 (mm) | 焦点位置 (mm) | 切割高度 (mm) |
|---|---|---|---|---|---|---|---|
| 1 | 20-28 | 3000 | N₂ | 12 | 1.5S | 0 | 0.8 |
| 2 | 10-15 | 3000 | N₂ | 12 | 2.0S | 0 | 0.5 |
| 3 | 5-6 | 3000 | N₂ | 14 | 2.5S | -1 | 0.5 |
| 4 | 2.5-3 | 3000 | N₂ | 14 | 3.0S | -2 | 0.5 |
| 5 | 1.8-2.2 | 3000 | N₂ | 14 | 3.0S | -2.5 | 0.5 |
| 6 | 0.8-1 | 3000 | N₂ | 16 | 3.0S | -3 | 0.5 |
常见问题
这些激光切割参数是免费查看的吗？
是的。每一张参数表都不需要注册、不需要付费，全部开放，没有分级。收费的不是内容，是我去看你这台具体的机器。
覆盖哪些激光切割设备？
参数库包含 21 种机型配置与 1,668 行工艺参数，覆盖碳钢、不锈钢、铝、黄铜与紫铜。每个配置页都会说明其光学配置。
光学配置: 3000S
准直100/聚焦150
相关文章
2026-10-22
Laser cuts then stops: why a cut dies halfway through
A cut that starts clean and dies mid-way is a changing fault, not a missing one. Heat, gas sag, nozzle soot…
2026-10-22Laser not cutting through: the order I check things in
Not cutting through describes what you see, not what is wrong. Here is the order I work through on a real call, before…
2026-10-12Dross on the bottom edge: the order I actually check things in
Slag clinging to the underside means the melt was not blown clear. Here is the order I work through on a real call…