LaserParams30000W (150u) Schneidparameter
30000W (150u) Schneidparameter RFL-30000(150u)
QuellmodellRFL-30000(150u)
OptikKollimator 100 / Fokus 200
Zeilen116
Werkstoffe5
Parametertabelle
Werkstoff wechseln, um alle Dickenzeilen dieser Konfiguration zu sehen.
Probeschnittwert — nur KleinserieFür die Produktion empfohlen
Hinweis: Rot markierte Parameter sind Probeschnittwerte. Die tatsächlichen Ergebnisse schwanken stark je nach Werkstoff, Gas und Maschinenzustand — sie eignen sich nur für die Kleinserienfertigung und sind für die Serienproduktion nicht empfehlenswert. Für die Serienfertigung wird ein Laser mit höherer Leistung empfohlen.
Baustahl
5 – 80 mm
| Dicke (mm) | Geschwindigkeit (m/min) | Leistung (W) | Gas | Druck (bar) | Düse (mm) | Fokusposition (mm) | Abstand (mm) | Frequenz (Hz) | Tastverhältnis (%) |
|---|---|---|---|---|---|---|---|---|---|
| 5 | 22-30 | 30000 | N₂/Air | 8 | 3.0S | 0 | 0.5 | ||
| 6 | 18-22 | 30000 | N₂/Air | 8 | 3.0S | -0.5 | 0.5 | ||
| 8 | 14-16 | 30000 | N₂/Air | 8 | 3.0S | -1 | 0.5 | ||
| 10 | 12-15 | 30000 | N₂/Air | 8 | 3.5S | -1.5 | 0.5 | ||
| 12 | 10-12 | 30000 | N₂/Air | 8 | 3.5S | -2 | 0.5 | ||
| 14 | 8-10 | 30000 | N₂/Air | 8 | 4.0S | -3 | 0.5 | ||
| 16 | 7-8 | 30000 | N₂/Air | 8 | 5.0S | -4 | 0.5 | ||
| 18 | 5.5-6 | 30000 | N₂/Air | 10 | 6.0S | -6 | 0.5 | ||
| 20 | 4.5-5.5 | 30000 | N₂/Air | 10 | 6.0S | -8 | 0.5 | ||
| 25 | 2.8-3.2 | 30000 | N₂/Air | 10 | 6.0S | -12 | 0.5 | ||
| 10 | 2-2.3 | 6000 | O₂ Positivfokus | 0.6 | 1.2E | +8 | 0.8 | ||
| 12 | 1.8-2 | 7500 | O₂ Positivfokus | 0.6 | 1.2E | +9 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | O₂ Positivfokus | 0.6 | 1.4E | +10 | 0.8 | ||
| 16 | 1.6-1.8 | 9500 | O₂ Positivfokus | 0.6 | 1.4E | +11 | 0.8 | ||
| 20 | 1.5-1.6 | 12000 | O₂ Positivfokus | 0.6 | 1.6E | +12 | 0.8 | ||
| 22 | 1.4-1.5 | 20000 | O₂ Positivfokus | 0.7 | 1.4SP | +13 | 0.5 | ||
| 25 | 1.2-1.4 | 20000 | O₂ Positivfokus | 1.0 | 1.5SP | +13 | 0.4 | ||
| 30 | 1.2-1.3 | 20000 | O₂ Positivfokus | 1.2 | 1.5SP | +13.5 | 0.4 | ||
| 40 | 0.6-0.9 | 20000 | O₂ Positivfokus | 1.4 | 1.6SP | +14 | 0.4 | ||
| 40 (kein Q235) | 0.3-0.6 | 20000 | O₂ Positivfokus | 1.6 | 1.8E | +13 | 2 | ||
| 50 (kein Q235) | 0.3-0.5 | 20000 | O₂ Positivfokus | 1.6 | 1.8E | +13 | 2 | ||
| 50 | 0.6-0.8 | 30000 | O₂ Positivfokus | 1.6 | 1.8SP | +14 | 0.4 | ||
| 60 | 0.2-0.25 | 30000 | O₂ Positivfokus | 1.6 | 1.8E | +13.5 | 2 | ||
| 70 | 0.18-0.2 | 30000 | O₂ Positivfokus | 1.7 | 1.8E | +13.5 | 2 | ||
| 80 | 0.12-0.15 | 30000 | O₂ Positivfokus | 1.8 | 1.8E | +14 | 2 | ||
| 12 | 3.2-3.5 | 30000 | O₂ Negativfokus | 1 | 1.6SP | -10 | 1.5 | ||
| 14 | 3-3.2 | 30000 | O₂ Negativfokus | 1 | 1.6SP | -10 | 1.5 | ||
| 16 | 3-3.1 | 30000 | O₂ Negativfokus | 1 | 1.6SP | -12 | 1.5 | ||
| 20 | 2.8-3 | 30000 | O₂ Negativfokus | 1.2 | 1.6SP | -12 | 1.5 | ||
| 25 | 2.6-2.8 | 30000 | O₂ Negativfokus | 1.3 | 1.8SP | -14 | 1.5 | ||
| 30 | 2.2-2.6 | 30000 | O₂ Negativfokus | 1.4 | 1.8SP | -14 | 1.5 | ||
| 35 | 1.4-1.6 | 30000 | O₂ Negativfokus | 1.4 | 2.0SP | -15 | 1.5 | ||
| 40 | 1-1.4 | 30000 | O₂ Negativfokus | 1.5 | 2.5S | -15 | 1.5 | ||
| 45 | 0.8-0.9 | 30000 | O₂ Negativfokus | 1.6 | 2.5S | -17 | 1.5 |
Edelstahl
1 – 100 mm
| Dicke (mm) | Geschwindigkeit (m/min) | Leistung (W) | Gas | Druck (bar) | Düse (mm) | Fokusposition (mm) | Abstand (mm) | Frequenz (Hz) | Tastverhältnis (%) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 50-60 | 12000 | N₂ | 8 | 2.0S | 0 | 1 | ||
| 2 | 50-60 | 12000 | N₂ | 8 | 2.0S | 0 | 0.5 | ||
| 3 | 40-50 | 30000 | N₂ | 8 | 2.5S | 0 | 0.5 | ||
| 4 | 35-40 | 30000 | N₂ | 8 | 2.5S | 0 | 0.5 | ||
| 5 | 25-30 | 30000 | N₂ | 8 | 3.0S | 0 | 0.5 | ||
| 6 | 22-25 | 30000 | N₂ | 8 | 3.5B | 0 | 0.5 | ||
| 8 | 18-22 | 30000 | N₂ | 8 | 5.0B | -1 | 0.5 | ||
| 10 | 13-16 | 30000 | N₂ | 8 | 5.0B | -1.5 | 0.3 | ||
| 12 | 10-12 | 30000 | N₂ | 8 | 6.0B | -2 | 0.5 | ||
| 14 | 8-10 | 30000 | N₂ | 8 | 6.0B | -4 | 0.3 | ||
| 16 | 7-8 | 30000 | N₂ | 8 | 6.0B | -5 | 0.3 | ||
| 18 | 6-7 | 30000 | N₂ | 8 | 6.0B | -6 | 0.3 | ||
| 20 | 4-5 | 30000 | N₂ | 12 | 6.0B | -7.5 | 0.3 | ||
| 25 | 2-2.5 | 30000 | N₂ | 12 | 7.0B | -12 | 0.3 | ||
| 30 | 1.2-2 | 30000 | N₂ | 12 | 7.0B | -16 | 0.3 | ||
| 40 | 0.6-0.8 | 30000 | N₂ | 16 | 7.0B | -16 | 0.3 | ||
| 50 | 0.2-0.3 | 30000 | N₂ | 16 | 8.0B | +11 | 0.3 | 200~800 | 60~75 |
| 60 | 0.15-0.2 | 30000 | N₂ | 20 | 8.0B | +11 | 0.3 | 200~800 | 60~75 |
| 70 | 0.1-0.13 | 30000 | N₂ | 20 | 8.0B | +11 | 0.3 | 100~200 | 60~75 |
| 80 | 0.08-0.1 | 30000 | N₂ | 20 | 8.0B | +11 | 0.3 | 100~200 | 60~75 |
| 90 | 0.05-0.06 | 30000 | N₂ | 20 | 8.0B | +11 | 0.3 | 50~100 | 60~75 |
| 100 | 0.04-0.05 | 30000 | N₂ | 20 | 8.0B | +11 | 0.3 | 50~100 | 60~75 |
| 1 | 50-60 | 12000 | Air | 8 | 2.0S | 0 | 1 | ||
| 2 | 50-60 | 12000 | Air | 8 | 2.5S | 0 | 0.5 | ||
| 3 | 40-50 | 30000 | Air | 8 | 2.5S | 0 | 0.5 | ||
| 4 | 35-40 | 30000 | Air | 8 | 3.5B | 0 | 0.5 | ||
| 5 | 25-30 | 30000 | Air | 8 | 3.5B | 0 | 0.5 | ||
| 6 | 22-25 | 30000 | Air | 8 | 3.5B | 0 | 0.5 | ||
| 8 | 18-22 | 30000 | Air | 10 | 3.5B | 0 | 0.5 | ||
| 10 | 14-18 | 30000 | Air | 10 | 3.5B | -1.5 | 0.3 | ||
| 12 | 12-14 | 30000 | Air | 10 | 5.0B | -4 | 0.3 | ||
| 14 | 10-12 | 30000 | Air | 10 | 5.0B | -6 | 0.3 | ||
| 16 | 8-9 | 30000 | Air | 10 | 5.0B | -7 | 0.3 | ||
| 18 | 6-7 | 30000 | Air | 10 | 5.0B | -8 | 0.3 | ||
| 20 | 5-6 | 30000 | Air | 10 | 5.0B | -9 | 0.3 | ||
| 25 | 2.5-3 | 30000 | Air | 10 | 5.0B | -13 | 0.3 | ||
| 30 | 1.5-2 | 30000 | Air | 10 | 5.0B | -17 | 0.3 | ||
| 40 | 0.8-1 | 30000 | Air | 16 | 7.0B | -16 | 0.3 | ||
| 50 | 0.4-0.65 | 30000 | Air | 16 | 8.0B | -18 | 0.3 | ||
| 60 | 0.15-0.2 | 30000 | Air | 20 | 8.0B | -20 | 0.3 | ||
| 70 | 0.1-0.13 | 30000 | Air | 20 | 8.0B | -25 | 0.3 |
Aluminium-Legierung
1 – 60 mm
| Dicke (mm) | Geschwindigkeit (m/min) | Leistung (W) | Gas | Druck (bar) | Düse (mm) | Fokusposition (mm) | Abstand (mm) | Frequenz (Hz) | Tastverhältnis (%) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 55-60 | 12000 | N₂ | 8 | 2.0S | 0 | 0.8 | ||
| 2 | 40-45 | 12000 | N₂ | 8 | 2.0S | -1 | 0.5 | ||
| 3 | 30-35 | 30000 | N₂ | 10 | 2.5S | -1 | 0.5 | ||
| 4 | 25-30 | 30000 | N₂ | 12 | 2.5S | -2 | 0.5 | ||
| 5 | 18-25 | 30000 | N₂ | 14 | 3.0S | -3 | 0.5 | ||
| 6 | 18-20 | 30000 | N₂ | 14 | 3.0S | -3 | 0.5 | ||
| 8 | 15-18 | 30000 | N₂ | 14 | 3.5S | -4 | 0.5 | ||
| 10 | 12-15 | 30000 | N₂ | 14 | 3.5S | -5 | 0.5 | ||
| 12 | 10-12 | 30000 | N₂ | 16 | 5.0B | -6 | 0.3 | ||
| 14 | 8-10 | 30000 | N₂ | 16 | 5.0B | -7 | 0.3 | ||
| 16 | 6-8 | 30000 | N₂ | 16 | 5.0B | -7 | 0.3 | ||
| 18 | 3-4 | 30000 | N₂ | 16 | 5.0B | -7 | 0.3 | ||
| 20 | 2-3 | 30000 | N₂ | 18 | 6.0B | -7 | 0.3 | ||
| 25 | 1.5-2 | 30000 | N₂ | 18 | 6.0B | -7.5 | 0.3 | ||
| 30 | 0.8-1 | 30000 | N₂ | 20 | 7.0B | -7.5 | 0.3 | 300~1000 | 60~80 |
| 40 | 0.5-0.8 | 30000 | N₂ | 20 | 7.0B | -9 | 0.3 | 300~1000 | 60~80 |
| 50 | 0.4-0.6 | 30000 | N₂ | 20 | 8.0B | -9 | 0.3 | 300~1000 | 60~80 |
| 60 | 0.2-0.3 | 30000 | N₂ | 20 | 8.0B | -9 | 0.3 | 300~1000 | 60~80 |
Messing
1 – 20 mm
| Dicke (mm) | Geschwindigkeit (m/min) | Leistung (W) | Gas | Druck (bar) | Düse (mm) | Fokusposition (mm) | Abstand (mm) | Frequenz (Hz) | Tastverhältnis (%) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 40-45 | 12000 | N₂ | 12 | 2.0S | 0 | 1 | ||
| 2 | 35-40 | 30000 | N₂ | 12 | 2.0S | 0 | 0.5 | ||
| 3 | 28-30 | 30000 | N₂ | 12 | 2.0S | 0 | 0.5 | ||
| 4 | 20-25 | 30000 | N₂ | 12 | 2.5S | 0 | 0.5 | ||
| 5 | 18-20 | 30000 | N₂ | 14 | 2.5S | 0 | 0.5 | ||
| 6 | 15-18 | 30000 | N₂ | 14 | 3.0S | 0 | 0.5 | ||
| 8 | 10-15 | 30000 | N₂ | 14 | 3.0S | 0 | 0.5 | ||
| 10 | 8-10 | 30000 | N₂ | 14 | 5.0B | -1 | 0.3 | ||
| 12 | 5-8 | 30000 | N₂ | 14 | 5.0B | -2 | 0.3 | ||
| 14 | 3-5 | 30000 | N₂ | 16 | 5.0B | -3 | 0.3 | ||
| 16 | 1.5-2 | 30000 | N₂ | 18 | 5.0B | -3 | 0.3 | ||
| 18 | 1.2-1.5 | 30000 | N₂ | 18 | 5.0B | -4 | 0.3 | ||
| 20 | 0.8-1 | 30000 | N₂ | 18 | 6.0B | -5 | 0.3 |
Kupfer
1 – 14 mm
| Dicke (mm) | Geschwindigkeit (m/min) | Leistung (W) | Gas | Druck (bar) | Düse (mm) | Fokusposition (mm) | Abstand (mm) | Frequenz (Hz) | Tastverhältnis (%) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 25-30 | 30000 | O₂ | 5 | 2.0S | 0 | 1 | ||
| 2 | 25-30 | 30000 | O₂ | 5 | 2.0S | 0 | 0.5 | ||
| 3 | 20-25 | 30000 | O₂ | 6 | 2.0S | 0 | 0.5 | ||
| 4 | 18-20 | 30000 | O₂ | 8 | 2.5S | -1 | 0.5 | ||
| 5 | 15-18 | 30000 | O₂ | 8 | 2.5S | -1 | 0.5 | ||
| 6 | 10-15 | 30000 | O₂ | 8 | 3.0S | -2 | 0.5 | ||
| 8 | 6-10 | 30000 | O₂ | 10 | 3.0S | -3 | 0.5 | ||
| 10 | 2-3.5 | 30000 | O₂ | 12 | 3.5S | -4 | 0.5 | ||
| 12 | 2-2.5 | 30000 | O₂ | 12 | 3.5S | -5 | 0.5 | ||
| 14 | 1.5-2 | 30000 | O₂ | 12 | 3.5S | -6 | 0.5 |
Häufige Fragen
Sind die Schneidparameter kostenlos einsehbar?
Ja. Jede Parametertabelle ist ohne Konto und ohne Zahlung lesbar — vollständig, ohne Stufen. Bezahlt wird nicht der Inhalt, sondern dass ich mir Ihre konkrete Maschine ansehe.
Welche Laserschneidmaschinen sind abgedeckt?
Die Bibliothek enthält 21 Maschinenkonfigurationen und 1,668 Parameterzeilen für Baustahl, Edelstahl, Aluminium, Messing und Kupfer. Jede Konfigurationsseite nennt ihre Optik.
Optik: 30000W (150u)
Kollimator 100 / Fokus 200